Return to the NoiseBug home page Have you put any NoiseBug goodies in your shopping cart? NoiseBug Ordering Information NoiseBug Used Gear & Specials! Virtually tour our Pomona Store! Got questions? NoiseBug has answers! Search the NoiseBug site for the product of your choice

Dreadbox Erebus Analog Synthesizer
Dreadbox Erebus Analog Synthesizer

NoiseBug Price : $599

Yes, the Dreadbox Erebus Analog Synthesizer is in stock!

Manufacturer Description:
Analog 2-voice Paraphony or Unison sounds, only with Through Hole components
2 x VCO with separate glide controls
2 pole (12dB/ocv) pre-fed resonating VC Low Pass Filter
VC LFO with additional VC Depth
2 x Envelope Generators (1xADSR and 1xAR dedicated to the AMP)
VC Delay/Echo
15 patches for an astonishing Modular experience
CV Outputs: LFO, Envelope (attenuated), Modulation Wheel (attenuated), Gate, Osc1 pitch (1V/ocv), Osc2 pitch (1V/ocv)
CV Inputs: Osc1, Osc2, Echo time, VCF, CV, GATE, LFO rate, PW , VCA
Paraphony CV/GATE outputs allows you to turn monophonic devices into Paraphonic, or even combine 2 monosynths into a paraphony orgy.

units with serial # below 1000 work only with 12V AC 1A power supply 2,5mm center pin, all the others work with 15VDC 1A power supply.
MIDI interface: Midi in/through DIN socket, Pitch note/gate on-off, retrigger function (on-board), Mod wheel (patched on-board), Pitch wheel, MIDI Channel select 1-7 or Omni (DIP switch)
MONO AUDIO IN (¼" TS-Unbalanced), accepts up to 3Vpp inputs
MONO AUDIO OUT (¼" TS-Unbalanced), sends up to 10Vpp o
Patches: 3.5mm mono
Gate in: activation at 0.9V in a low gain up to 5V for max gain
Gate out: 0-5V
Osc1, Osc2, CV IN: works at 1V/oct and can accept from ±12V
CV1, CV2 outs: send 1V/oct (converted to analog via midi keyboard)
Mod Wheel out: converts the midi modulation wheel to analog 0-5V out
Envelope out: 0-6.6V depending on the depth setting
LFO out: ±5V
LFO frequency range: 0.009Hz (110sec) up to 30Hz (0.033sec)
LFO rate CV in: 0-5V
PW in: ±5V
Echo CV in:0-5V (works best up to 2.5V)
VCA in: 0-5V
Suggested room temperature for best oscillator stability: 18-30 Celcius
Weight: 1.4 kgr
225 x 160 x 75 mm

Your destination for Large Format Modular and Hardware Synthesizers in the USA